How to avoid redo logs and standby redo logs being created as OMF files during a DUPLICATE ... FOR STANDBY operation

Recently I had to create a Data Guard physical standby database, and I used RMAN active database duplication ( "duplicate target database for standby from active database" ) to create the database on the remote server.

As the remote server had the same file system layout as the primary, I used the directive

NOFILENAMECHECK

in the duplicate command.

Consequently, I expected all datafiles, including the redo and standby redo log files, to be created in exactly the same location as the target.

For some reason this did not happen; in fact, they were named with OMF file names, and placed in the db_recovery_file_dest which point to the path /recovery_data, while on the primary, the same files reside in /u02/oradata

I found the solution based on a post called "JoeLi's TechLife" and added my own experience to find a workaround.

The author points out

after the duplication, all other files seem to be fine regarding their names and locations except for redo log files and standby redo log files. They are created under the fast recovery area with OMF file names!

How come? Well here is the reason — duplicate will always re-create redo log files and standby redo log files. And because DB_RECOVERY_FILE_DEST is defined on the Primary server, redo and standby redo log files are created as OMF despite NOFILENAMECHECK is used. And they are not multiplexed as you have on the Primary database!

I was not aware of this.

The author continues to point out that he hasn't found a solution, yet.

The proposed solution according to Joe is

... to recreate redo log and standby redo log files on the newly created standby server — basically dropping the OMF ones and creating them under the correct locations with correct file names.

I did however, find a solution, which worked for me and was really quite simple, although not very intuitive: simply set the directive log_file_name_convert in your clone script, like examplified below:

connect target sys/password@primary
connect auxiliary target sys/password@stb
run{
        allocate channel c1 type disk;
        allocate channel c2 type disk;
        allocate channel c3 type disk;
        allocate channel c4 type disk;
        allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
SET DB_UNIQUE_NAME='stb'
SET FAL_CLIENT='stb'
SET FAL_SERVER='primary'
SET LOG_ARCHIVE_DEST_1='location=use_db_recovery_file_dest valid_for=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=stb'
SET LOG_ARCHIVE_DEST_2='' comment 'Must be set to empty string during duplication'
SET STANDBY_FILE_MANAGEMENT='AUTO'
SET DG_BROKER_CONFIG_FILE1='/u01/oracle/product/12c/dbs/dr1stb.dat'
SET DG_BROKER_CONFIG_FILE2='/u01/oracle/product/12c/dbs/dr2stb.dat'
SET LOG_ARCHIVE_CONFIG='DG_CONFIG=(stb,primary)'
SET DG_BROKER_START='TRUE'
SET LOG_ARCHIVE_TRACE='0' comment 'Must be set to same value as primary during duplicaton'
SET dispatchers='(PROTOCOL=TCP) (SERVICE=stbXDB)' comment 'Must be set to unique name of stb db'
SET LOCAL_LISTENER='stb.skead.no' comment 'Must be set to unique name of stb db'
SET LOG_ARCHIVE_FORMAT='%t_%s_%r.dbf' comment 'Must be set to same value as primary during duplicaton'
SET LOG_FILE_NAME_CONVERT='/redodata','/redodata' comment 'Must be set during cloning to avoid OMF naming of redo log files'
NOFILENAMECHECK
USING COMPRESSED BACKUPSET;
}

Aftwards, the query

COL MEMBER FORMAT A50
SET LINES 200
SELECT A.GROUP#,A.MEMBER, B.BYTES/1024/1024 "MB", B.ARCHIVED,B.STATUS,B.SEQUENCE#
FROM V$LOGFILE A INNER JOIN  V$LOG B ON A.GROUP# = B.GROUP#
ORDER BY GROUP# ASC;

set lines 200
col member format a50
select s.group#,s.thread#,s.sequence#,s.archived,s.status,f.member, f.type
from v$standby_log s, v$logfile f
where f.type = 'STANDBY'
and s.group# = f.group#;

confirms that the standby database was created with non-OMF datafiles:

SQL> @chk_redo.sql

    GROUP# MEMBER                                                     MB ARC STATUS            SEQUENCE#
---------- -------------------------------------------------- ---------- --- ---------------- ----------
         1 /redodata/redo01.log                            2048 NO  CURRENT                 156
         2 /redodata/redo02.log                            2048 YES UNUSED                    0
         3 /redodata/redo03.log                            2048 YES UNUSED                    0


    GROUP#    THREAD#  SEQUENCE# ARC STATUS     MEMBER                                             TYPE
---------- ---------- ---------- --- ---------- -------------------------------------------------- -------
         4          1          0 YES UNASSIGNED /redodata/stb_redo01.log                  STANDBY
         5          1          0 YES UNASSIGNED /redodata/stb_redo02.log                  STANDBY
         6          1          0 YES UNASSIGNED /redodata/stb_redo03.log                  STANDBY
         7          1          0 YES UNASSIGNED /redodata/stb_redo04.log                  STANDBY

How to alter a column to use a sequence generated number

In my example, mytable contains a columnn called id, which is of datatype bigint.

If you want to use a sequence to automatically popluate the column at each insert, you can alter the column to support this with the below syntax:

ALTER TABLE myschema.mytable
    ALTER COLUMN id SET DEFAULT nextval('myschema.mysequence'::regclass);

How to log entire output from a shell script

I have recently used exec to send all output from a bash script to a designated logfile.

For example, if you have a complex script which performs multiple tasks and even execute tasks under a different user along the way, all the output will go into the global logfile indicated by the $GLOGFILE variable:

#!/bin/bash
export SCRIPT_NAME=`basename $0`
export TS=`date +\%m.\%d.\%y\_%H_%M_%S`
export GLOGFILE=/u01/mylogfile_${TS}.log
touch ${GLOGFILE}
chmod 666 ${GLOGFILE}
exec 1> ${GLOGFILE} 2>&1
echo "Starting job at " `date`

your shell instructions here

echo "Ending job at " `date`
exit

Good sources:

Linuxfordevices.com

Geeksforgeeks.org

How to correct an identity column sequence after import

Thanks to the authors behind Grassroots-oracle for sharing this trick.

I finished an import of a table with an identity column, and for some reason, the sequence started to hand out number at the bottom of the range, although it had reached 10632546 in the source table.

My table's DDL:

CREATE TABLE MYTABLE
(
  MYID                   NUMBER GENERATED ALWAYS AS IDENTITY ( START WITH 21 MAXVALUE 9999999999999999999999999999 MINVALUE 1 NOCYCLE CACHE 20 NOORDER NOKEEP NOSCALE) NOT NULL,
  EVENT_TYPE             VARCHAR2(75 BYTE)      NOT NULL,
  SOURCE                 VARCHAR2(50 BYTE)      NOT NULL,
  FORMAT                 VARCHAR2(75 BYTE)      NOT NULL,
  EVKEY                  VARCHAR2(60 BYTE)      NOT NULL,
  TITLE                  VARCHAR2(40 BYTE)      NOT NULL,
  TIMESTAMP              TIMESTAMP(6)           DEFAULT current_timestamp,
  DOCUMENT               CLOB                   NOT NULL,
  FILEREF                VARCHAR2(200 BYTE)     DEFAULT 'some text' NOT NULL,
  TRANNUM                NUMBER
)
LOB (DOCUMENT) STORE AS SECUREFILE (
  TABLESPACE  LOB_DATA
)
TABLESPACE DATA;

After import, the developers tested an insert and the row was inserted with MYID set to 1.

There is no Primary Key on the table, which I pointed out to the developers.

The sequence name was ISEQ$$_88174, and the query below returned the number 2 after import in the destination database:

select "ISEQ$$_88174".nextval
from dual;

To "start where the sequence left off" in the source database, all I had to do was to execute:

ALTER TABLE MYTABLE
MODIFY (MYID  GENERATED ALWAYS AS IDENTITY ( START WITH LIMIT VALUE) );

If I queried the sequence's next value now, it had changed from 2 to 10632547.

I then checked the maximum value of the column:

select max(MYID) from MYTABLE;

And it returned 10632546, in other words, the next value would be the current max value + 1.

Getting ORA-01031: insufficient privileges when creating a view that is refering to another schema's table

If you get PRA-0131 during creation of a view refering to a schema object in a different table, try the following:

grant select on foreing_schema.foreign_table to scott with grant option;

Listener output showing multiple instances when only one exists

In one of my multitenant setups, I saw the following output from the listener:

lsnrctl status cdb

Service "sales" has 2 instance(s).
  Instance "cdb", status READY, has 2 handler(s) for this service...
  Instance "sales", status UNKNOWN, has 1 handler(s) for this service...

There is only one instance in my setup, the container database called "cdb".
What's causing the listener to view the pdb "sales" as a separate instance, then?

See this post where Uwe Hesse explains:

It is nothing to worry about when you see the same instance showing up twice, once with status READY and once with status UNKNOWN. READY means listener knows this because PMON of that instance told him so (dynamic registration) UNKNOWN means listener knows this because of SID_LIST entry in the listener.ora (static registration)

Quite correctly, I had a static entry in my listener.ora file:

SID_LIST_cdb =
  (SID_LIST =
    (SID_DESC =
      (ORACLE_HOME= /u01/orasoft/product/19c)
      (SID_NAME = sales)
    )
  )

If I remove the following part

(SID_NAME = sales)

and restart the listener, the extra instance will be removed from the listener output:

lsnrctl stop cdb
lsnrctl start cdb

Output:

Service "sales" has 1 instance(s).
  Instance "cdb", status READY, has 2 handler(s) for this service...

Workaround for error ERROR: OCI Error DPI (status = 7-DPI-007: invalid OCI handle or descriptor) when starting Golden Gate replicate process

When trying to login to the golden gate cli interface, I got the following error:

GGSCI (myserver1.oric.no) 7> dblogin useridalias mydb  domain admin
ERROR: OCI Error DPI (status = 7-DPI-007: invalid OCI handle or descriptor).

Cause:

Incorrectly specified network configuration:
sqlnet.ora

names.default_domain = world

tnsnames.ora

mydb =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = myserver1.oric.no)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = mydb)
    )
  )

To correct the error, you need to do either of the following:

1. remove the names.default_domain from sqlnet.ora

or

2. add an alias to your tnsnames.ora file

mydb.world =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = myserver1.oric.no)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = mydb)
    )
  )